Hoppstetter's Office Products

Log In

Username Remember Password

+++++++++++++

Your Name

Recipients Email

Message

MSDS

Name: Betco Extreme Floor Stripper
SKU: BET184B500
Price: 160.69 USD

Concentrate - 640 fl oz (20 quart) - Lemon Scent Width - 1 Each - Fast Acting, Low Odor, Rinse-free - Green

Extremely powerful and fast-acting
Developed to quickly strip multiple coats of burnished finish from a variety of floors
Use on all types of resilient flooring
Requires no rinsing
Concentrated with up to 1:5 ratio

Item: BET184B500
Manufacturer: Betco CorporationView similar

$160.69 / EA

Qty

General Information
Marketing Information	Extreme Floor Stripper is fast-acting, low-odor and extremely powerful. With an 11.8 to 12.8 pH, this rinse-free, concentrated formula with a lemon fragrance has a lower pH than competitive formulas and requires no neutralization or rinsing. High-power, high-speed floor stripper was developed to penetrate and remove multiple coats of burnished floor finish from a variety of floors with a minimum amount of labor. Using the latest in technology, this powerful professional stripper unlocks the chemical bonds of acrylic and urethane fortified floor finishes releasing them from the floor surface and is suitable for use on most surfaces. It is not recommended on linoleum or sheet vinyl floors.
Product Line	Extreme
Product Name	Extreme Floor Stripper
Product Type	Floor Stripper
Manufacturer	Betco Corporation
Manufacturer Website Address	http://www.betco.com
Packaged Quantity	1 Each
Manufacturer Part Number	184B500
Brand Name	Betco

Product Information
Cleaner Volume	640 fl oz (20 quart)
Features	Fast Acting Low Odor Rinse-free
Cleaner Type	Concentrate
Scent	Lemon
Cleaner Form	Liquid
Composition	Water Butoxyethanol Ethanolamine Sodium Xylene Sulfonate Benzyl Alcohol C9-11 Alcohols Ethoxylated Tetrasodium EDTA D-Limonene Fragrance 2,6-Dimethyl-7-Octen-2-Ol Partially Fluorinated Alcohol Surfactant Colorant
Application/Usage	Floor Surface
Ph	11.8 - 12.8
Directions/Instructions	Recommended for removing multiple coats of water-based acrylic and urethane fortified floor finishes from all types of resilient tile and hard surfaces. Not Recommended on linoleum or sheet vinyl floors. Pre-test in a small area; bleeding or discoloration may our on linoleum, rubber tile, or asphalt tile. Sweep or dust mop floors or to remove any large debris. For light to medium strip, dilute 10 oz. /gal. (1:12). For heavy striping, dilute 25 oz. /gal. (1:5) with cold water. Apply solution liberally to floor surface. Allow 3-5 minutes contact time. Be sure to keep surface wet at all times. Agitate with a low speed rotary machine, automatic scrubber or stripping machine. Pick up solution with a wet vacuum, automatic scrubber or mop and bucket and thoroughly rinse the floor. Allow floors or to dry completely before applying finish or sealer. No flood rinsing is necessary if surface appears free of dust and residue.

Physical Characteristics
Product Color	Green
Color Family	Green

Note: cookies must be enabled.

Category:

Go To Favorites after added